Russell Hobbs FRESH AIR PRO

RHDH1101 Revision 2.1
PARTS
ASSEMBLY
FULL WARNING
INSTALLING THE FILTER
1. Check the Water Tank [3] is correctly
installed and does not have any packaging
inside.
2. Replace Water Tank [3] into Dehumidifier.
3. Plug into Mains Plug Socket.
4. Power on by pressing the On/Off Button [6].
5. Light will illuminate the top section, and the
Air Purifier is now operating.
To turn the Light Indicator On or Off, press the
On/Off Button [6] Press again to switch unit off.
1. HEPA Filter
2. Filter Cover
3. Water Tank
4. Speed Setting
5. Dehumidifier
On/Off Button
6. Main On/Off
Button
The water tank has a
maximum capacity of
1000ml, and an operating
capacity of 750ml/day.
When the Water Tank is
full, the Light illumination
will turn red and begin
flashing, and the unit will
stop operating.
2
1
3
4
5
6