EasyManuals Logo

Russell Hobbs Honeycomb User Manual

Russell Hobbs Honeycomb
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
CLEANING THE FILTER
Check your hands are free from soap, hand cream, or anything which might leave a taint.
Switch the power off and remove the plug from the wall power outlet.
Allow the kettle to cool down fully.
Open the lid.
Pull the lter up and out of its housing.
NOTE: Take care not to press on the mesh part of the filter – you may damage it.
Rinse the lter under a running tap whilst brushing with a soft brush.
Rinse the kettle in case scale particles have fallen inside.
Turn the lter so the tab at the top of the lter faces the rear of the kettle.
Slide it down into the guides in the lter housing. Ensure it is rmly in place.
Rell the kettle and close the lid.
Caution: Do not use the kettle without the filter in place – it may spit boiling water.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug, battery or cord)
is disposed of through controlled recycling facilities and must not be disposed of in general
household waste. For more information about recycling of electrical and battery operated
appliances, please contact your local council or your local household waste disposal.
service.

Other manuals for Russell Hobbs Honeycomb

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Russell Hobbs Honeycomb and is the answer not in the manual?

Russell Hobbs Honeycomb Specifications

General IconGeneral
MaterialStainless Steel
Boil Dry ProtectionYes
360 Degree BaseYes
Water Level IndicatorYes
Concealed Heating ElementYes
Limescale FilterYes
CordlessYes
Capacity1.7 liters
Voltage220-240 volts
ColorBlack
Power3000W

Related product manuals