4
6. Press the bottle down to run the motor. Release it to stop.
7. For hands free operation, turn the bottle left to run the motor (FIG A), then back, to stop.
8. Once finished, lift the bottle off the motor unit, turn it upright, unscrew the blade unit then
screw the lid onto of the bottle.
9. Flip the cap on the lid open to drink, press it closed to store.
USING THE COOL TUBE
The Cool Tube helps to keep your drink cooler and fresher for longer.
1. Open the Cool Tube screw cap and fill the tube with water to the MAX mark on the tube.
2. Replace the screw cap.
3. Place the Cool Tube in the freezer (or freezer compartment of your fridge) until the water
inside has frozen.
4. Once frozen, screw the Cool Tube into the underside of the lid (FIG B)
5. Follow the previous instrctions to make your drink and once made, fit the lid and Cool Tube
to the bottle. Remember, when using the Cool Tube only fill the bottle up to the Cool Tube
MAX marking (
MAX
).
CLEANING
1. Unplug the appliance.
2. Wipe the the motor unit with a damp cloth.
3. Remove the seal with something blunt, like the handle of a fork.
4. Hand wash the removable parts.
5. Press the seal back into place with something blunt, like the handle of a fork.
¬ You may wash these parts in the top rack of a dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
The damage should be cosmetic only, and should not affect the operation of the appliance.
To Next Page
Loading...
Need help?
General
