Press the switch button, the heater enters into standby mode,
By now, if the ambient temperature was below 4 ℃, the heater can automatically start heating
function;
1、Press the switch button, the heater enters into standby mode, the screen blinks at 1 second
interval.
；
2、Then press the “MODE” button, the heater enters into heating status. The screen blinks at 1
second interval.
；
2.1、Press the “+” or “-” button to set the desired temperature from 13 to 30℃.
For example, press“+” one time to set temperature to be 25℃.
For example, press“-” one time to set temperature to be 23℃.
2.2、Meanwhile, you can press“℉/℃”button to convert Fahrenheit degrees and Celsius degrees.
Following is the screen of 24℃ converted to be 75℉
3、Then press“MODE”again, the heater enters into “SET TIMER (AUTO-OFF)” status
To Next Page
Loading...
