3. To ensure the dryer is fixed securely to the wall and there is no danger
of it falling from the wall or coming away from the wall. The wall
hanging brackets have to be fixed into timber studs that are within the
wall. These can found by using a stud finder (not supplied). If there
aren’t timber studs in the location you want to fit the wall hanging
brackets because the stud position is too narrow or too wide then you
will have to fit timber slats between the studs to mount the brackets.
Do not install into plasterboard.
15
Wall Installation
Timber
slats
450mm 450mm
To Next Page
Loading...