Installation – Door attachment
1. There are 4 packs that will have parts A,B,C and D (see the below), please
separate the parts of each different pack
2. Open the cabinet door and the fridge door, mark on the back of the cabinet
door where the top of the fridge door reaches. Place the door guide (part A) on
the back of the cabinet door, in the location shown below and mark the position of
first hole and the last hole on the door guide. Fix the door guide into place with 2
flat headed screws.
3. Clip the door guide cover (part C) on the door guide (part A) hiding the screws.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
15
A. Door guide
B. Door guide holder
C. Door guide cover
D. Door guide holder cover
A B
C
D
To Next Page
Loading...
