Pre-set function
The microwave can be programmed to start cooking at a pre-set time. To
programme the microwave to do this:
• Press the “Micr./Grill/Combi.” button. The display will show ‘P100’. Turn the rotary
control to select the microwave power, or press the “Micr./Grill/Combi.” button up
• Press “START/+30SEC./CONFIRM” to confirm the power setting.
• Turn the rotary control to select the cooking time, between 0:05 and 95:00.
• Press the “CLOCK/PRE-SET” button once. The hour number will flash – turn the
rotary control to adjust the hour number, between 0 and 23, to the hour you want
the microwave to start cooking.
• Press the “CLOCK/PRE-SET” button once more. The minute numbers will now
flash – turn the rotary control to adjust the minute numbers, between 0 and 59, to
the minute you want the microwave to start cooking.
• Press the “START/+30SEC./CONFIRM” button. The microwave will beep twice
when the preset time arrives, and will start cooking automatically.
Child protection lock:
It is possible to lock the microwave. This prevents children and people not
authorised to use your microwave from using it. Press and hold the “STOP/CLEAR”
button for 3 seconds. There will be a long beep, and the display will show an empty
square. The microwave is now locked and cannot be operated.
To unlock the microwave, press and hold the “STOP/CLEAR” button for 3 seconds.
There will be a long beep, and the display will return to the normal clock display.
The microwave can now be operated.
CLEANING AND MAINTENANCE
• This appliance is for household use only and is not user-serviceable.
• Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
• Always remember to unplug the unit from the electrical outlet when not in use and
before cleaning.
• It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.
• The body of the microwave should be cleaned with a damp cloth. Do not let water
enter the microwave.
• Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
• Do not immerse the microwave in water or any other liquid, or hold it under a
running tap to clean.
• To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
To Next Page
Loading...
