EasyManua.ls Logo

Russell Hobbs RHC400 - Special Usage and Cleaning; Horizontal Steam Ironing; Steam Cleaning Applications; Cleaning Frames and Accessories

Russell Hobbs RHC400
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
HORIZONTAL STEAM IRONING/PRESS
Horizontal steaming allows garments to be pressed and create crease lines where
necessary.
For steam ironing check that there is water in the tank.
Position garment on ironing board.
Check that pockets, turn-ups, and cuffs are empty.
Hold the handheld steamer as if it’s a regular iron and horizontally position the plate against
the fabric.
Press the steam trigger as required.
• Ifdryironingisrequired,emptythewatertankanduseasspeciedabove,withoutholding
the steam trigger button.
AUTO SHUT-OFF
The steamer will automatically switch to auto shut-off mode after being left inactive for 15
minutes. The boiler and water pump will turn off until reactivated. Rapid blinking of the power
button light indicates that the steamer is going into auto shut-off mode. To resume steaming,
press the steam trigger or power button and wait for steamer to fully reheat.
STEAM CLEANING AROUND THE HOME
Using steam to clean household items that can tolerate hot, damp steam without damage is non-
toxic, and inexpensive. This natural cleaning method is beneficial to those sensitive to chemical
cleaners or trying to reduce chemicals in the home. Steam upholstery, draperies, linens and home
textiles to clean and refresh.
CLEANING STEAMER EXTERIOR
1. Make sure steamer is off, unplugged and completely cool.
2. Wipe the ironing plate and outer surface with soft, damp cloth. Water and small amounts of
gentle household soaps, such as dishwashing liquid, can be used on the exterior. Never use
heavy-duty cleaner, or abrasive scouring pads that may scratch or discolor the steamer.
3. After the steamer has been thoroughly dried, turn it back on and lightly steam over an old
cloth. This will help remove any reside left in the steam holes.
4. Whennishedcleaning,turnthesteameroffbypressingthepowerbuttonuntiltheblue
power light turns off (about 3 seconds). Unplug, empty tank, and allow time to cool before
storing.
CLEANING FRAMES AND ACCESSORIES
For all accessories, allow to fully dry before using again or storing.
Accessories are not suitable for cleaning in a washing machine.
Lint frame: Wipe with damp cloth to clean.
Delicate frame: Wash with cold water and small amounts of gentle cleanser if needed. The
fabric in the frame cannot be removed.
Upholstery frame: The fabric on this frame can be removed and hand washed with cold water
and gentle cleanser.

Related product manuals