6. With a spoon or spatula, load freshly prepared biscuit or cookie dough/filling into the
top of the Tube.
NOTE: In order to ensure proper operation, do not fill the tube past the MAX Fill
Line. DO NOT OVERFILL!
7. Look inside the Tube to see the ridges extending from top to bottom. These ridges
align with the outside contours of the 2 Discs. Grasp the Tube firmly and turn
clockwise until the Tube locks into position. (See Figure 9)
8. The Biscuit/Cookie Maker is now fully assembled and ready for use.
Figure 9
To Next Page
Loading...
