EasyManua.ls Logo

Russell Hobbs RHEM20L

Russell Hobbs RHEM20L
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
NOTE: the step quantities for the adjustment time of the coding switch are as follows:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
QUICK START
This feature allows you to start the microwave quickly.
1. In standby mode, press the START/ +30SEC/ CONFIRM button to cook with 100%
microwave power for a 30 second duration. Each time you press on the same button then
the cooking period will increase by 30 seconds. The maximum cooking time is 95 minutes.
2. After choosing the desired period of cooking time, press START/ +30SEC/ CONFIRM to
start cooking.
During the microwave cooking cycle and defrost-by time process, you can press the START/
+30SEC / CONFIRM button to increase the cooking or defrost period of time.
If using an auto menu or defrost-by weight then the cooking or defrost period of time cannot be
increased.
2. Alternatively, you can press START/ +30SEC/ CONFIRM and then turn the control dial to
choose the amount of cooking time desired.
3. Again, after choosing the desired period of cooking time, press START/ +30SEC/
CONFIRM to start cooking.
DEFROST BY-WEIGHT
The time and the defrosting power levels are adjusted automatically once the weight is
programmed in.
FOR EXAMPLE: Suppose you want to defrost food.

Related product manuals