Usage
Function buttons
The buttons can be used to set additional functions.
Use this button to adjust the setting values downwards.
Use this button to set the different modes (press and hold for 3
seconds to turn the oven on: the symbol will appear on the
display).
Use this button to adjust the setting values upwards.
The oven cavity
• The oven light is located in the cooking compartment. During oven operation,
the oven light is on. By turning the function selector to any position, the oven
light can also be switched on without the oven heating up.
• A cooling fan protects the oven from overheating.
• The cooling fan switches on and off as required. The hot air escapes above the
door.
• So that the cooking compartment cools down more quickly after operation, the
cooling fan continues to run for a certain period afterwards.
• There are side support racks affixed to the compartment that accessories such
as the wire shelf baking tray, etc. can be inserted in to.
• The coating of the oven cavity is enamel.
• Before you use the accessories for the first time, clean them with hot soapy
water and a soft dish cloth.
• Clean all accessories by hand, do not clean in the dishwasher.
13
To Next Page
Loading...
