Usage
Warnings:
• When it is first used, it is normal for the oven to give off odours; this does not
pose any risk and does not indicate a malfunction; they will disappear in
time.
Setting the clock
When the oven is first connected to the electrical supply and powered on, the
clock will need to be set. The display will automatically show the time as "12.30“,
there will be a single beep and the "." will flash.
Note: ensure the correct time is set before using the oven.
Note: the clock is a 24 hour clock, for example 2PM will be shown as 14.00.
To set the correct time of day
1. Press "+" or "-" button to adjust the hour setting.
2. Press the mode button to confirm the hour setting.
3. Press"+" or "-" button to adjust the minute setting.
4. Press mode button to confirm the minute setting and the timer will be go
in to standby mode.
If the display does not flash, adjust the time by pressing and holding the"+" and"-"
buttons at the same time for more than 3 seconds.
14
To Next Page
Loading...
