Installation
Attaching the appliance (requires a minimum of 2 people)
Components inside the appliance may have sharp edges. Wear protective gloves.
1. On the ceiling, mark the centre point of the appliance. Place the Hanger Frame
on the ceiling and mark out the location of the 4 drill holes.
Note, point A on the diagram is the front left corner of the cooker hood.
2. Drill four Ø10mm diameter holes to a depth of 80mm and press in the wall
plugs flush with the ceiling. Fasten the Hanger Frame to the ceiling with the 4
larger screws.
15
4 x Wall plugs
& 4 x Large
screws
To Next Page
Loading...
