Russell Hobbs RHK2 - User Manual

This document is an instruction and guarantee manual for the Russell Hobbs Edinburgh Satin Cordless Kettle, Model No. RHK2, distributed by Salton.

Function Description:

The Russell Hobbs Edinburgh Satin Cordless Kettle is designed for heating water for household use. It features a cordless design, allowing the kettle to be lifted from its base for easy pouring and filling. The kettle operates by heating water via an immersed element and automatically switches off once the water has boiled. A power-on indicator light signals when the kettle is actively heating. The appliance is equipped with a filter to prevent scale particles from entering drinks.

Important Technical Specifications:

While specific wattage or capacity are not explicitly stated, the manual implies standard kettle operation. It requires a minimum of two cups of water for operation to prevent damage to the element and has a MAX fill mark to prevent overfilling and potential boiling water ejection. The kettle is designed for use with its provided power stand. It incorporates a boil-dry device that automatically switches off the kettle if it is accidentally switched on without sufficient water.

Usage Features:

• Cordless Design: The kettle can be easily removed from its stand for filling and pouring, offering convenience and portability.
• Lid Mechanism: The lid features a knob for lifting, and users are advised to open it carefully, especially after boiling, due to escaping steam. It must be properly closed for the kettle to switch off automatically.
• Water Level Indicator: A MAX mark inside the kettle indicates the maximum fill level, preventing overfilling.
• On/Off Switch: A simple press-down switch initiates heating, and the kettle automatically switches off (switch returns to 'Off' position) once water boils. It can also be manually switched off by pressing the switch up.
• Steam Venting: The design allows steam used for automatic shut-off to escape via vents on the underside of the base, which is a normal operational characteristic.
• Safety Precautions: The manual emphasizes several safety features, including not immersing electrical components in water, using handles as parts may be hot, and ensuring the element is fully immersed during operation. It also warns against moving the kettle while switched on or opening the lid during heating/boiling.
• Boil-Dry Protection: An automatic shut-off mechanism activates if the kettle is switched on without sufficient water, protecting the heating element.
• Filter: A fitted filter prevents scale particles from passing into drinks, ensuring cleaner water.

Maintenance Features:

• Regular Descaling: The manual strongly recommends regular descaling, even in soft water areas, to prevent limescale build-up. Limescale can cause overheating, reduce the kettle's lifespan, and trigger the boil-dry cut-out.
  • Descaling Methods: Users can use a descaler suitable for plastic products, following the product's instructions. Alternatively, white vinegar (half a litre for 1 hour without heating) or citric acid (25g in a litre of boiled water for 15 minutes) can be used. After descaling, thorough rinsing and boiling/discarding water are necessary to remove residues.
  • Warranty Note: Products returned under guarantee with faults due to scale will be subject to a repair charge.
• Cleaning:
  • General Cleaning: The kettle and stand should be cleaned with a damp cloth and mild detergent after being switched off, unplugged, and cooled down.
  • Internal Cleaning: If detergent is used inside the kettle, it must be thoroughly rinsed to avoid tainting the water.
  • Immersion Warning: The kettle or stand should not be immersed in water or any other liquid. Harsh or abrasive cleaners/solvents are not recommended.
  • Connector Care: All connectors and sockets must be kept dry.
• Filter Cleaning: The filter should be cleaned whenever noticeable deposits are present or if pouring is affected.
  • Procedure: After switching off, unplugging, and cooling the kettle, open the lid. The filter can be prized from the spout by pushing through it. Rinse the filter under a tap with a soft brush. Rinse the kettle internally to remove any fallen scale particles. To replace, align the filter sides inside the kettle and push firmly into place.

The manual also includes a 2-year warranty provided by Salton (Aust) Pty Ltd and Salton NZ Ltd, covering defects in material and workmanship. It specifies conditions under which the warranty may be voided (improper installation, misuse, unauthorized servicing) and provides contact information for customer service in Australia and New Zealand. Registration of the warranty card is optional but offers benefits like information on promotions and product notifications.