25
HOW TO USE THE MICROWAVE
Preset cooking function
You can set your microwave to start cooking at a pre-set time, without the need
to be present to input the programmes. Make sure your food is in the
microwave and prepared when you programme the pre-set function.
You will need to set the clock and the cooking menu and time.
It is possible to input a maximum of 2 cooking stages. Do not use the defrost
function in the pre-set function. The auto menu can be set for a single stage
only.
Preset cooking function example
If the current time is, 12:30 and you want the microwave to cook on 80% power
for 7 minutes at 14:20:
1. Press the ’Power’ button twice for 80% microwave power – ’80%’ is
displayed.
2. Turn the ‘Weight/Time’ dial to adjust the cooking time to 7 minutes.
3. After the above steps, DO NOT press the ‘Weight/Time’ dial, but do as
follows:
4. Press the ‘Preset’ button, the current time displays and the hour figures flash.
5. Turn ‘Weight/Time’ dial to adjust the hours to display ‘14:’ or ‘2’. Press
‘Preset’ button and the minute figures will flash along with the hour figures.
Turn the ‘Weight/Time’ dial to adjust the minutes to display ‘20’. This sets the
start time.
6. Press ‘Weight/Time’ dial to finish setting, the oven will automatically start to
operate at 14:20.
Please note: 'End' will be displayed and 2beeps will be heard every 2 minutes
until the oven door is opened or the 'Stop/Cancel' button is pressed.
If you wish to cancel the pre-set cooking, press the ‘Stop/Cancel’ button.
To Next Page
Loading...
