27
HOW TO USE THE MICROWAVE
Multi-stage cooking
Two cooking stages can be set in sequence.
If one of your required cooking stages is for defrosting, make sure this is
programmed to come on first.
The buzzer will ring once after each stage and then the next stage will
proceed.
Note: The auto menu or the pre-heating functions cannot be set as part of
the multi-stage cooking sequence.
For example, if you want to defrost the food for five minutes, then cook
with 80% microwave power for 7 minutes:
1. Press the “WEIGHT/TIME DEFROST” button twice and the screen will
display "d-2“.
2. Turn the “TIMER/WEIGHT/AUTO MENU” dial to adjust the defrost time
to 5 minutes.
3. Press the “MICROWAVE/GRILL/CONV./COMBI.” button once.
4. Turn the “TIMER/WEIGHT/AUTO MENU” dial till "P80" display and
flash(refer to earlier instructions for power levels.)
5. Press the “START/+30SEC./CONFIRM” button to confirm.
6. Turn the “TIMER/WEIGHT/AUTO MENU” dial to adjust the cooking time
to 7 minutes.
7. Press “START/+30SEC./CONFIRM” to commence cooking.
To Next Page
Loading...
