21
USING THE MICROWAVE OVEN
CLOCK SETTING CONTINUED…
1)Press “CLOCK/TIMER” to finish the clock setting procedure. The ":" will
then flash.
2)The clock is now set. If the clock needs altering again, please repeat the
previous steps.
Note:
1) If the clock is not set, it will not function when powered.
2) During the process of clock setting, if you press " STOP/CLEAR ",
the oven will return to the previous setting.
Important note:
To remove any residue from the oven that may have been left from the
manufacturing process, you should place a cup that is half filled with
water in the microwave.
Set the microwave on its highest power level for 2 minutes, the cup and
water will be hot so care must be taken when removing it from the oven
Afterwards.
To Next Page
Loading...
