EasyManua.ls Logo

Russell Hobbs RHMA 050

Russell Hobbs RHMA 050
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
STORAGE
Empty the internal water container.
Clean the screen filter.
Remove the active carbon filter and 3M™ High Air Flow filter
before end of season storage and install new filters at the
beginning of the new season.
The old filters can be disposed of in the ‘Non-biological rubbish
container’.
Replacement filter packages are available from Amalgamated
Appliances (Pty) Ltd.
Put the unit in Fan Only mode for a few hours to ensure that the
inside becomes completely dry.
Store the cable as shown.
Protect the unit against dust and store in a dry place, not accessible to children.
Reminder:
Waste electrical products must not be disposed of with household waste.
This product should be taken to your local recycling centre for safe treatment.
TECHNICALDATA
Model RHMA050
Cooling capacity
measured conform EN 14511
BTU/h 11300
kW 3.3
Power consumption kW 1.5
Mains
V / Hz / Ph
220 – 240 / 50 / 1
Fan speeds 3
Thermostatic range °C 18 – 32
Protection class IP 21
Refrigerant type R410A
Refrigerant load g 630
Dimensions (w x h x d) mm 500 X 840 X 415
Net weight kg 39.3
RHMA050 can be connected only to a supply with system impedance no more than 0.110 Ohm.
If necessary, please consult your supply authority for system impedance information.
Subject to modifications without prior notice.
For greater precision, please refer to the rating label placed on the product.

Related product manuals