21
HOW TO USE THE MICROWAVE
1. To select a power level, press the ‘Microwave’ button.
• When pressed once the screen display will show 100%
• When pressed twice the screen display will show 90%
• When pressed three times the screen display will show 80%
• When pressed four times the screen display will show 70%
• When pressed five times the screen display will show 60%
• When pressed six times the screen display will show 50%
• When pressed seven times the screen display will show 40%
• When pressed eight times the screen display will show 30%
• When pressed nine times the screen display will show 20%
• When pressed ten times the screen display will show 10%
2. Then press the ‘10min/100g’, ‘1min/10g’ and ‘10sec’ buttons to select the
required time.
3. Press the ‘Start/+30 Sec.' button to commence cooking.
4. Once cooking is complete, the display will show ‘End’ and 3 beeps will
sound. These will repeat every few minutes until the microwave door is
opened or the ‘Stop/Cancel’ button is pressed.
Please note: The maximum time that can be entered is 1 hour (60:00). Do not
operate the microwave empty, this can cause irreparable damage. At the
maximum microwave power, the oven will automatically lower the power after
a certain length of cooking time in order to lengthen the service life of the
appliance.
Please note: During the process of setting the cooking programme, if you
press the ‘Stop/Cancel’ button, the oven will go back to its resting state.
To Next Page
Loading...
