Russell Hobbs RHPAC11001

TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The appliance does
not come on
-There is no current
-It is not plugged into
the mains
-The internal safety
device has tripped
-
Wait
-
Plug it into the
mains
-
Wait 30 minutes
and if the problem
persists please
contact our
Customer Service
team on
0345 209
7461.
The appliance works
for a short time only
-There are bends in
the air exhaust hose
-
Something is
preventing the air
from being
discharged
-
Position the air
exhaust correctly,
keeping it as short
and free of curves as
possible.
-
Check and remove
and obstacles
obstructing the air
discharge.
The following
message appears on
the display:
LT/PF/FT
-The appliance has a
self
-
diagnosis system
to identify a number
of malfunctions
-
See the SELF-
DIAGNOSIS section
of this booklet
27v2.5RHPAC11001