Inserting or Replacing the Batteries
To insert or replace the batteries follow the steps below:
1. Remove the cover on the rear of the remote control.
2. Insert two “AAA” 1.5V batteries into the correct positions (see
instructions inside the battery compartment).
NOTE:
‐ If the remote control is replaced or disposed of, the batteries must
be removed and discarded in accordance with current legislation as
they are harmful to the environment.
‐ Do not mix old and new batteries.
‐ Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries.
‐ Do not dispose of batteries in fire, they may explode or leak.
‐ If the remote control is not going to be used for a long period of
time remove the batteries.
USING YOUR AIR CONDITIONER
RHPAC3001 r4.1 17
To Next Page
Loading...
