COOL Mode, FAN Mode, DRY Mode, Setting the Timer
To correctly set these four modes/functions using the remote
control, follow the same steps that are stated in the ‘Operating from
the control panel’ section of this manual but instead of pressing the
buttons mentioned on the control panel press the corresponding
buttons on the remote control.
Air Flow Direction
This appliance does not have an oscillation function, but air flow can
be manually adjusted to the required direction.
- Select the desired direction of air flow by firstly manually setting
the 4 front slats ‘A’ to the desired position, followed by the internal
slat ‘B’ using the small lever on the right.
USING YOUR AIR CONDITIONER
RHPAC3001 r4.1 18
To Next Page
Loading...
