OPERATING INSTRUCTIONS
(1) Loosen the screw from the tube
and connect with the main body,
then fasten the screw.
(2) Assemble the main body onto the
aluminum tube then place onto
the small base.
(3) Fasten the tube to the big base by
the luck nut.
CAUTION:
* All adjustment actions must be after
the fan stop operation and unplug the
fan from the socket.
* Place the well assembled fan on a flat
surface before plugging into the socket.
Adjust the grill to a desired fan pitching * This product does not warranty for
angle. commercial usage.
CLEANING AND MAINTENANCE
·This appliance is for household use only and is not user-serviceable. ·
·Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary. ·
·Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the speed control is set to “0”. ·
·It is much easier to clean the blade, fan guard directly after they have been disassembled.
Wash them in warm, soapy water, rinse and dry well. ·
·The body of the appliance and the stand should be cleaned with a damp cloth. Do not let
water enter the appliance or the stand. ·
·Do not use bleach or other abrasive substance or solvents to clean your appliance as it can
be damaging to the finish. ·
·Do not immerse the whole unit in water or any other liquid, or hold it under a running tap to
clean.
·To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in soapy
water or mild non-abrasive cleaner. Dry it with a clean, dry, soft cloth.
To Next Page
Loading...
