CONTROL PANEL
Page 9
On/Standby
Speed Fan mode selection (low/high)
Temp + Increase the temperature setting
Temp - Decrease the temperature setting
Timer Timer setting function (0 – 12 hours)
USING YOUR PLUG IN HEATER
Heats up to 10 square metre (107 square foot) room
1. Plug the heater into a suitable power outlet, ensuring all the
positioning instructions are followed.
Note: The heater must be in the upright position (Control panel
is at the top). The distance between the heater bottom and the
ground should be more than 30cm, the distance between the
side of the heater and the wall or any other object should be
more than 50cm.
To Next Page
Loading...
