USING YOUR HEATER
1. Before connecting to the mains socket, position the
appliance away from curtains, furniture or wall coverings
and other flammable materials.
2. Insert the mains plug into a suitable 13 Amp mains socket.
3. To activate the heater, turn the power control dial clock
wise to the fan icon ‘ ’ for cool air, the ‘ ’ setting for the low
heat setting (1200W) and to the ‘ ’ setting for the
maximum heat setting (2000W).
4. Turn the Thermostat Control clockwise to increase the
temperature.
Note: this appliance will not operate if the thermostat has
been set too low.
Note: If the thermostat dial is set toward the highest setting
and the power control is set to off then the indicator light will
not stay illuminated. No heat will be emitted as the power to
the heating elements is off.
9
To Next Page
Loading...
