Russell Hobbs RHVM901

HOW TO USE THE MICROWAVE
Pre-set cooking function
You can set your microwave to start cooking at a pre-set time, without the
need to be present to input the programmes. Make sure your food is in
the microwave and prepared when you programme the pre-set function.
You will need to set the clock and the cooking menu and time.
Do not use the defrost function in the pre-set function. The auto menu can be
set for a single stage only.
Pre-set cooking function example
If the current time is, 12:30 and you want the microwave to cook on
80% power for 7 minutes at 14:20:
1. Press the ’Power Level’ button twice for 80% microwave power – ‘P-80’ is
displayed.
2. press the ‘1 Min’ button seven times to set the cooking time to 7 minutes.
3. After the above steps, DO NOT press the ‘Start/Quick Start’, but do
as follows:
4. Press the ‘Preset’ button, the current time displays and the hour
figures display.
5. Press ’10Min’ dial to adjust the hours to display ‘14:00’. Press ‘Preset’
button and the minute figures will display with the hour figures, Press the ‘1
Min’ button to adjust the minutes to display ’14:20’. This sets the start time.
6. Press ‘Start/Quick Start’ button to finish setting, the oven will
automatically start to operate at 14:20.
Please note: 'End' will be displayed and a sound will be heard every 2
minutes until the oven door is opened or the ‘Pause/Cancel' button is
pressed.
If you wish to cancel the pre-set cooking, press the ‘Pause/Cancel’ button.
23