HOW TO USE THE MICROWAVE
Two Stage Cooking
A maximum of two different stages. To set a maximum of two different stages.
For instance, to defrost an item and the follow it with the cooking cycle.
Note: The buzzer will ring once after each stage and then the next stage
will proceed.
Note: The Auto menu or the pre-heating functions cannot be set as one of
the multi-stage cooking.
If one of the stages is for defrosting this should be programmed to come on first .
Example: if you want to cook the food at 100% microwave power for 5 minutes,
then cook it at 80% microwave power for 7 minutes. The steps are as follows:
1. Open the door and place the food into the oven.
2. Press “ POWER LEVEL “ button once, the screen will display “P100”.
3. press the ‘1 Min’ button 5 times to set the cooking time to 5 minutes.
4. Press “ POWER LEVEL “ button two time, the screen will display “P80”.
5. Press the ‘1 Min’ button 7 times to set the cooking time to 7 minutes.
6. Close the door, and press the "START/QUICK START“ button to start
the cooking process.
24