Cleaning and Maintenance:
Replacing the light modules
• Before changing the light module(s), unplug the appliance from the mains or
switch off the circuit breaker in the fuse box.
• Only use a light that is the same type and same power, please contact customer
services on 0345 208 8750 or visit https://mda.russellhobbs.com
1. Push the clips on the side of the panel inwards to release the panel (shown
below) and carefully lower and remove the panel.
2. Replace the 1.5W LED module (max.1.5W). The reverse steps 1 and 2
3. Plug in the hood and turn on the power to the socket.
19
Lamp cap
Max
Power
Voltage Image
Lamp
cap
ILCOS D
code
LED
module
1.5W 220V – 240V
Dimensions:
(H)33.2mmx(W)120mm
-
DBS-1.5-
S-33.2/120
To Next Page
Loading...
