12
STORING YOUR STEAM MOP
After use
1. When you require a break or have finished steam cleaning, tilt the steam
mop forwards so that it is stood vertical. This will stop the unit from
steaming.
2. Turn the power dial to the ‘off’ position and allow the unit to cool.
3. Switch the power off at the plug socket and remove the plug.
4. Allow the mop pad to fully cool and then carefully remove from the mop
head.
Note: Do not install or remove the mop pad while steam is emitting.
5. Empty any remaining water from the water tank before storing.
6. Wrap the power cord around the upper and lower cord hooks.
Store upright in a protected, dry area.
1 2
3
4
5
6
To Next Page
Loading...
