EasyManua.ls Logo

Russell Hobbs Steamglide

Russell Hobbs Steamglide
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
H Don’t put the appliance in liquid, don’t use it in a bathroom, near
water, or outdoors.
7 Don’t iron clothing while it’s being worn – you’ll injure the wearer.
8 Don’t use the appliance for any purpose other than those
described in these instructions.
9 Don’t scratch the soleplate – avoid buttons, zips, etc.
10 The appliance has a protective thermal fuse, which will blow if it
overheats. If this happens, the appliance will stop working, and
must be returned for repair.
household use only
U BEFORE USING FOR THE FIRST TIME
•Remove labels, stickers and packing from the iron and soleplate.
•Don’t worry if the iron smokes a bit, it’ll stop as the element cures.
•Iron an old piece of cotton fabric, to clean the soleplate.
•Press the ~ and * buttons 3 or 4 times, to check them.
C PREPARATION
1 Check for textile care symbols (i j k l).
2 Iron fabrics needing low temperatures j first, then those that
need medium temperatures k, and finish with those needing
high temperatures l.
b TEMPERATURE SETTING GUIDE (#2)
label marking dot setting
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures
l hot – cotton, linen /max
i do not iron
, If the instructions on the fabric label differ from this guide, follow
the instructions on the label.
X FILLING (#3)
3 In a soft water ares, use tap-water, in a hard water area, use
distilled water (not chemically descaled or softened water).
4 Distilled water must be marketed as suitable for use in irons.
5 Unplug the iron.
6 Set the temperature control to and the steam control to S (#2).

Related product manuals