Russound SDB series User Manual

Explains the high-power, dual-source, autoformer-based speaker selectors for multiple rooms.

Details how to adjust impedance settings for various speaker/amplifier loads using charts.

Explains using 4-pole screw terminals for connecting speakers and amplifiers up to 12 gauge wire.

Guides on setting volume to avoid distortion, DC clipping, and amplifier protection.

Outlines powering amplifiers, selecting sources, and adjusting volume for speaker selection.

Illustrates front panel controls including volume, on/off, and source selection buttons.

Visual representation of amplifier and speaker connections to the SDB series unit.

Provides power, impedance, dimensions, and weight details for each SDB model.

Outlines the 10-year warranty, its exclusions, and return/repair procedures.