Need help?Do you have a question about the Russound SS-4.2 and is the answer not in the manual?
Uses selector's internal resistors for impedance matching protection.
Uses external devices when selector's protection is bypassed.
Requires a 4-ohm stable amplifier.
Allows 4 to 8-ohm stable amplifier with external controls.
Connect speakers directly to selector for internal impedance matching.
Connect speakers via external volume controls for impedance matching.
Uses selector's internal resistors for impedance matching protection.
Uses external devices when selector's protection is bypassed.
Requires a 4-ohm stable amplifier.
Allows 4 to 8-ohm stable amplifier with external controls.
Connect speakers directly to selector for internal impedance matching.
Connect speakers via external volume controls for impedance matching.
General| Type | Speaker Selector |
|---|---|
| Impedance Protection | Yes |
| Number of Zones | 4 |
| Frequency Response | 20Hz - 20kHz |
| Weight | 3 lbs |
To Next Page
