CONTROL PANEL
1. AC 220–240V: Connection plug (AC 220–240V)
2. DC 12V: Connection plug (DC 12V)
3. AC-FULL/AC-LOW: Power Switch
4. WARM/COOL: Function switch
5. LED-indicator: (Green and Red light)
OPERATION
• First make sure the WARM/COOL switch is in OFF position.
If the car power (DC12V) is used: Insert the plug of DC power cord into the 12V-socket.
If the household power (AC220–240V) is used: Insert the plug in the wall socket.
For more ecient cooling/heating: Set the switch in AC-FULL position.
• Cooling: Set the WARM/COOL switch to the position of COOL. The green indicator will be
on indicating the appliance is in cooling mode.
• Heating: Set the WARM/COOL switch to the position of WARM The red indicator
will be on indicating the appliance is in heating mode.
• Turn the handle forward to open the lid.
POWER CORD
This appliance is provided with an DC power cord and a AC power cord (see the picture
below). Please have a check when the appliance is used for the first time.
MAINTENANCE
The appliance needs only an external regular cleaning. Before cleaning, always unplug the
appliance. Do not use hard detergent or other chemical solutions to clean the box. Wipe
the appliance with a moistened cloth only. When the appliance is not in use for a long time,
please maintain it in a dry and clean place with ventilation.
DC Power cord (for usage in cars)
AC Power cord (for usage in household)
3
1 2 3 4 5
220–240~ 12V
AC-FULL
AC-LOW
WARM
COOL
DCAC
OFF
To Next Page
Loading...
Need help?
General
