RUSTA 907512050101 - Filter and Cable Management; Filter Maintenance; Power Cord Storage

9
GUIDANCE ON THE DISASSEMBLY AND INSTALLATION OF FILTER PARTS
1. Remove the filter support.
2. Rotate the bottom buckle at first, and
then remove the filter.
3. Take out the filter for cleaning.
4. Install filter support.
REPLACE WATER
After stopping the cool wind function for 2 minutes, it’s
applicable to pull out the water tank to replace water,
as water in the pipeline and filter flows back to
the water tank.
COLLECTION OF POWER LINES
1. Press winding hooks at both sides, and make
it open.
2. Wind the power lines around the winding hook.
Stop the cool
wind function
for 2 minutes.