4
BLUETOOTH PAIRING
1. Turn the Bluetooth Speaker o.
2. Press the ON/OFF button to Bluetooth mode. The blue LED will stay
illuminated 6 seconds, and then flash rapidly.
3. Read the operating instructions for Bluetooth on your Bluetooth device then let
the device search for the Bluetooth speaker.
4. The mobile should find the S10 Bluetooth Speaker and ask if you wish to
connect your mobile to the speaker. Press YES or CONFIRM to confirm this
action.
5. Enter your pin/password: 0000, and press YES or CONFIRM.
NOTE! If the connection is successful, the blue LED will stop flashing. If pairing is
unsuccessful, the blue LED will keep flashing rapidly.
LED FLASHING INSTRUCTION
Blue LED flashing: In Micro TF card MP3 mode.
Blue LED on: Micro TF card MP3 in pause or in AUX mode.
Blue LED on: In Bluetooth mode.
Blue LED flashing rapidly: Bluetooth pairing.
BATTERY CHARGE
Red LED on: Charging.
Red LED o: Full power
Beeping sound: Battery low.
To Next Page
Loading...