Part # Description M139
Net Wt (lbs)
587-003 1/8" pop rivet (NOT SHOWN, attaches part #883-131) 4 4
600-600 Intermediate Level Winch 7
600-601 Flanged bronze bearing, I/L winch
600-602 I/L winch spool
600-603 I/L winch body
600-604 3/16"x1" Cotter pin, I/L winch
600-661 Sheave block
600-662 Link Snap
600-663 Intermediate Level Cable, 23', for use with M139 1
600-664 Intermediate Level Rope, 10', for use with M139 0.5
600-665 1/2" Machine bushing
883-001 MP 2'x20' Platform w/side, rear guardrails & decals 1 1 280
883-002 MP Removable top guardrail, 20'2", w/1-1/4" safety pin 1 1 26.3
883-003 MP Remov. Mid rail, 119", w/2-1/4" safety pins 2 2 10.5
883-004 MP Remov. Center post 1 1 6
883-005 Front upright extension ONLY, W/O Sheave & clevis pin 1 1 37
883-006 Rear upright extension ONLY, W/O Sheave & clevis pin 1 1 39
883-007 Ladder extension 1 1 23
883-008 Extension X-brace, 168", per piece 2 2 19
883-009 Sheave (w/bronze bushing insert), 1/2"x2-1/2" 4 4 0.5
883-009B Bronze replacement bushing for sheave #883-009 0.1
883-010 Clevis pin, 1/2"x1-1/4" (for upright extensions) 2 2 0.1
883-011 Cotter pin, 5/32"x1" 12 12
883-012 Hair pin clip 2 2 0.1
883-013 Safety pin, 3/8" 11 13 0.2
883-014 Safety pin, 3/4" 6 6 0.8
883-015 5/8"x2-1/2" Bolt w/lcknt (adjusting arms & hairpins) 4 4 0.4
883-016 Reducer bushing (used with adjusting arms) 2 2 0.1
883-017 Clevis pin, 1/2"x1-1/4" (for main upright) 2 2 0.2
883-018 Front upright, 12' ONLY, W/O Sheave & Clevis pin 1 67
883-019 Front upright, 18' ONLY, W/O Sheave & Clevis pin 1 98
883-020 Rear upright, 12' ONLY, W/O Sheave & Clevis pin 1 69
883-021 Rear upright, 18' ONLY, W/O Sheave & Clevis pin 1 99
883-024 3/8"x3" Bolt w/locknut 2 2 0.2
883-025 Adjusting arm, 128", M139 2 31
883-026 Adjusting arm, 208", M195 2 50
883-027 Ladder, 145", 14 rungs, M139 1 42
883-028 Ladder, 221", 21 rungs, M195 1 60
883-030 1/4"x3/4" Carriage Bolt w/bent & flat wash & locknut 2 2
883-031 Cable, 1/8"x35', M139 2 1
883-032 Cable, 1/8"x47', M195 2 1.4
883-033 Cable clevis 2 2 0.2
883-034 3/8"x1-1/2" Bold w/lock luster & lock nut 4 4 0.1
883-035 3/8" Thick washer 8 8 0.1
883-036 Lift arm (only, imcomplete) for Main Platform 2 2 14.4
883-038 3/8"x1-1/2" Roller bearing 4 4 0.2
883-039 1/4' Poly rope, 16', M139 2 0.2
To Next Page
Loading...