EasyManua.ls Logo

RV Products 6636 Series User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION INSTRUCTIONS
FOR
6636 SERIES
PACKAGE AIR CONDITIONER
Question and Answer IconNeed help?

Do you have a question about the RV Products 6636 Series and is the answer not in the manual?

RV Products 6636 Series Specifications

General IconGeneral
BrandRV Products
Model6636 Series
CategoryAir Conditioner
LanguageEnglish

Summary

Warnings and Safety Notices

Important Installation Notice

Instructions are for qualified individuals; unlicensed personnel should not install.

Shock Hazard Warning

Always disconnect power to prevent injury or damage from electrical shock.

Dielectric Strength Test Warning

Do not perform dielectric strength test on AC units to prevent circuit board damage.

Improper Installation Warning

Improper installation can damage equipment, create hazards, and void warranty.

General Information and Unit Installation

Condensing Air Flow Requirements

Essential guidelines for proper airflow to the condensing coil.

Unit Placement and Airflow Guidelines

Details unit positioning for airflow/service and specific airflow rules.

Airflow Obstruction and Recirculation Prevention

Rules against blocking discharge and recirculating hot air.

Duct Mounting and Configuration

Shock Hazard: Drilling Openings

Do not drill new openings; use pilot holes to avoid damaging circuits.

115 VAC Electrical Wiring

Shock Hazard: Power Disconnection

Always disconnect power before installation to prevent shock.

Shock Hazard: Wiring Procedure

Connect leads to correct lugs (BLACK, WHITE) and ground wires.

Shock Hazard: White Wire and Ground Connection

Connect white wire to neutral and mechanical ground to grounding lug.

Thermostat and 12 VDC Wiring

Thermostat Fuse and Current Draw Warning

Current draws over 1 amp or shorts cause permanent thermostat failure.

Checkout Procedure

Related product manuals