Need help?Do you have a question about the RVP 8000 SERIES and is the answer not in the manual?
General| Brand | RVP |
|---|---|
| Model | 8000 SERIES |
| Category | Air Conditioner |
| Language | English |
How to inquire about the A/C unit, requiring model and serial numbers for support.
Recommends mounting location for Motor Homes near the driver's compartment.
Recommends location for Travel Trailers and Mini-Homes near the door.
Recommends center roof placement for Van installations.
Recommends placement for Truck with Camper installations for maximum cooling.
Guides placement of the mount gasket over the roof opening.
Details installing the ceiling assembly mount frame with provided bolts.
Describes how to confirm proper bolt tension using gasket indicating tabs.
Outlines required specifications for high voltage wiring, including wire gauge.
Details crucial steps for connecting white wire to neutral and ground wire.
Instructs careful uncartoning and preparing the ceiling assembly components.
Guides fastening the duct collar and metal flange to the unit.
Explains routing the power supply wire and connecting it to the control box.
Details plugging the air conditioner conduit into the thermostat and control boxes.
Verifies thermostat probe position and filter placement in the shroud.
Details reinstalling the Elect-A-Heat assembly and the ceiling shroud.
Guides powering on the unit and performing system checkout procedures.
Emphasizes matching the roof top unit with the correct interior ceiling assembly.
Instructs uncartoning, removing grille/filters, and preparing the 9000 series assembly.
Guides fastening the duct collar and plugging the electrical conduit for the 9000 series.
Ensures filters are positioned and installs the ceiling grille for the 9000 series.
Guides turning on the power supply to the roof top air conditioner.
Introduces system checkout for the 9000 series, referring to unit-specific instructions.
To Next Page