17
This message displays for various reasons. Please find below a list of the main
issues：
Reasons for LO message display Advice
Temperature reading hampered by hair
or perspiration.
Make sure there is no obstruction or
dampness prior to taking temperature.
Temperature hampered by an air draft or
dramatic change in ambient
temperature.
Make sure there is no air blowing in the
area of use; this could affect the
infrared reading.
Temperature readings are too close together,
and the thermometer did not have time to
reboot.
Pause for 15 seconds minimum between
readings; a one-minute pause is
recommended.
The measuring distance is too far.
Take measurements at the recommended
distance (between 3 and 5cm; 1.2” and 2 ”).
To Next Page
Loading...