To Next PageTo Next Page
Need help?Do you have a question about the Ryobi C357 and is the answer not in the manual?
Explains the meaning of safety symbols like DANGER, WARNING, CAUTION, and NOTE for user awareness.
Highlights crucial warnings regarding manual review, servicing by professionals, and eye protection.
Stresses the importance of wearing safety goggles or a full face shield to prevent severe eye injury.
Covers work area cleanliness, proper dress, and visitor safety for accident prevention.
Details requirements for safety glasses, hearing protection, and dust masks during operation.
Guidelines on securing work, cord care, tool upkeep, and checking for damaged parts.
Addresses risks in explosive atmospheres, cord handling, tool cleanliness, and work area lighting.
Outlines procedures for wheel speed, workpiece security, and avoiding hazards during cuts.
Stresses staying alert, exercising control, and not operating under the influence of substances.
Specifies requirements for extension cord type, gauge, and condition for safe use.
Details power supply requirements and proper grounding procedures to prevent shock.
Guide for safely removing the machine from its packaging and checking contents.
Lists the items provided with the cut-off machine.
Lists key technical data such as wheel size, speed, and power requirements.
Details the maximum sizes of pipes, stock, and metal the machine can cut.
Introduces the cut-off machine and its operating features.
Details the motor's power and accessibility of brushes for servicing.
Explains the function of the self-retracting wheel guard and the vise clamp.
Describes the adjustable fence for angles and the quick lock-release for the vise.
Features for carrying the machine and engaging the lock-on button for continuous cutting.
Mechanism for locking the spindle during wheel changes.
Security feature to prevent unauthorized use by locking the switch with a padlock.
Step-by-step guide for safely replacing the abrasive wheel.
Important cautions regarding correct wheel size and thickness for safety.
Details on the fence's role in workpiece support and angle adjustment.
Procedures for setting the fence to specific cutting angles using hex key.
Steps to reposition the fence for different cutting widths or depths.
Explains how to adjust fence bolts for cutting thin/wide or tall/thick stock.
Instructions on using the lever to quickly open and close the vise clamp.
How to adjust the depth stop for maximum cutting capacity as the wheel wears.
Lists the intended uses of the cut-off machine, such as cutting metal stock and pipes.
Requirements for power supply and how to operate the machine's switch.
How to engage and disengage the lock-on feature for continuous operation.
Critical safety warnings and precautions for the cutting process.
Detailed steps for performing a cut, including securing material and wheel speed.
Warnings about touching hot materials after cutting.
Guidelines for cleaning plastic parts and information on lubrication.
Precautions for using and inspecting extension cords for safety.
Step-by-step instructions for checking and replacing worn motor brushes.
Lists causes and solutions for the machine failing to start.
Addresses problems like low speed, stalling, and overheating, with their causes and solutions.
Solutions for issues like wheel hitting table, poor cutting, and excessive vibration.
A reiteration of extension cord safety guidelines with a chart.
Information on obtaining repair parts and service from authorized centers.
Guidance on locating the model and serial numbers for service purposes.
General
