To Next PageTo Next Page
Need help?Do you have a question about the Ryobi CID1802P and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Chuck Size | 1/4 in |
| Max Torque | 170 Nm |
| Speed Settings | 2 |
| Weight | 1.6 kg |
| No Load Speed | 0-3200 rpm |
| Battery Type | Lithium-ion |
Guidelines for maintaining a clean, well-lit, and safe work environment to prevent accidents.
Rules for safe handling of electrical components, cords, and battery packs to prevent shock and fire.
Recommendations for operator alertness, proper attire, and avoiding accidental starting.
Essential rules for safe operation, including extension cord usage and electrical shock prevention.
Key safety instructions for battery-powered tools, covering fire risks and temperature conditions.
Critical safety guidelines for using the battery charger, including handling damaged cords and water exposure.
Explanation of Danger, Warning, Caution, and Note terms used in the manual for safety communication.
Detailed technical specifications for CID1442P and CID1802P models, including chuck, motor, and speed.
Guidance on allowing hot battery packs to cool down before recharging to prevent issues.
Familiarize yourself with the drill's operating features and safety requirements before use.
Instructions for charging the battery pack, including initial charge requirements and connection procedures.
Explanation of the two-speed gear train for selecting drilling or driving speeds and torque.
Details on LED indicators for charger status and battery pack charging for the CID1802P model.
How to use the switch trigger for starting, stopping, variable speed, and the switch lock feature.
Step-by-step instructions for correctly attaching and detaching the battery pack from the drill.
Operating the reversible function, using the keyless chuck for bit installation and removal.
Detailed steps for inserting and securing drill bits into the keyless chuck, with safety warnings.
Procedures for removing bits and adjusting the torque setting for driving screws and drilling.
Information on storing bits and switching the drill to hammer action mode for masonry work.
Guidance on drilling techniques, securing workpieces, and handling potential binding or breakthrough issues.
Instructions for removing the chuck assembly and re-tightening a loose chuck, noting left-hand threads.
Warnings against modifying the tool, using incorrect parts, solvents, and handling hazardous substances.
Tips for maximizing battery life, including storage, charging, and temperature considerations.
Details the terms of the Ryobi guarantee, including coverage, exclusions, and conditions for service.
Provides contact details for Ryobi Australia and New Zealand service centers for warranty inquiries.
