8
SPECIFICATIONS
UNPACKING
INSTRUCTIONS
Your circular saw has been shipped completely
assembled.
■ Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing
list are included.
■ Inspect the tool carefully to make sure no
breakage or damage has occurred during
shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■ If any parts are damaged or missing, please
contact Ryobi Customer Service. Refer to the back
page of this manual for contact information.
Blade Diameter 7-1/4 in. (184 mm)
Blade Arbor 5/8 in. (16 mm)
Cutting Depth at 0° 2-3/8 in. (60 mm)
Cutting Depth at 45° 1-13/16 in. (46 mm)
Cutting Depth at 51.5° 1-5/8 in. (41 mm)
Rating 120 volts, 60 Hz, AC
Input 12 amperes
No Load Speed 4600 RPM
Net Weight 11 lbs. (5 kg)
PACKING LIST
Circular Saw
7-1/4 in. (184 mm) Blade
Case
Wrench
Warranty Card
Operator's Manual
WARNING:
If any parts are missing, do not operate this tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
To Next Page
Loading...
Need help?
General
