8
SPECIFICATIONS
UNPACKING
INSTRUCTIONS
Your circular saw has been shipped completely
assembled.
■ Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing list
are included.
■ Inspect the tool carefully to make sure no breakage
or damage has occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■ If any parts are damaged or missing, please contact
Ryobi Customer Service. Refer to the back page of
this manual for contact information.
Blade Diameter 7-1/4 in. (184 mm)
Blade Arbor 5/8 in. (16 mm)
Cutting Depth at 0° 2-3/8 in. (60 mm)
Cutting Depth at 45° 1-13/16 in. (46 mm)
Cutting Depth at 51.5° 1-5/8 in. (41 mm)
Rating 120 volts, 60 Hz, AC
Input 13 amperes
No Load Speed 5500 RPM
Net Weight 12 lbs. (5.4 kg)
PACKING LIST
Circular Saw
7-1/4 in. (184 mm) Blade
Case
Rip Guide
Dust Nozzle Kit
Wrench
Warranty Card
Operator's Manual
WARNING:
If any parts are missing, do not operate this tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
To Next Page
Loading...
