To Next PageTo Next Page
Need help?Do you have a question about the Ryobi ECS1350 and is the answer not in the manual?
Emphasizes wearing safety goggles or glasses, recommending specific types for eye safety during operation.
Explains the function and operation of the safety lock-off switch to prevent accidental startups.
Lists the intended uses of the circular saw, primarily for cutting timber products.
Details the power requirements for the saw, specifying voltage and frequency for optimal performance.
Instructions for safely removing and installing the saw blade, including using the blade lock button.
Details the safety feature that prevents accidental activation of the trigger switch.
Guidance on inspecting and cleaning the motor housing to remove dust and foreign matter.
Instructions on how to adjust and secure the cutting angle using the bevel angle locking lever.
Explanation of the function and operation of the pivoting lower blade guard during cuts.
Steps for adjusting and securing the cutting depth using the depth locking lever.
Details the port for connecting dust extraction systems or vacuum cleaners for efficient dust removal.
Describes the scale used to indicate the angle of the base plate tilt for cutting.
Explains the use of the parallel fence guide for making straight, parallel cuts in wood.
Describes the knob used to secure the parallel fence guide to the base plate.
Information on keeping the base plate flat against the workpiece and its function in changing cut angles.
Explains the function of the lever used to lift the blade guard for plunge cutting.
Describes the fixed guard that encloses the upper part of the saw blade.
Details the riving knife's purpose in preventing wood from closing on the blade and its adjustment.
Advises against using solvents on plastic parts and recommends clean cloths for removing dirt and dust.
Provides guidelines on selecting appropriate extension cord sizes to minimize power loss and prevent overheating.
Instructs users to contact an authorized Ryobi Service Centre for repairs and provides contact information.
States that tool bearings are pre-lubricated for life and require no further lubrication under normal conditions.
Lists specific safety precautions related to saw blades, guards, and maintenance procedures.
Outlines the terms and conditions for the product guarantee, including exclusions for misuse or damage.
General
