10
ACCESSORY TABLE
Figure Qty Accessory Application
1 Silicon carbide dressing stone
Bringing shape back to parabolic shaped
grinding attachments
3
Felt polishing wheels (25.4 mm x 12.7
mm)
Polishing and buffi ng metals, stone, glass
and ceramics
2 Fiberglass cut-off wheel (Ø 31.8 mm)
Cutting and trimming metals, plastics and
ceramics
1 Screw mandrel (Ø 3.2 mm) Attaching felt attachments
1 Mandrel ( Ø 3.2 mm shank x 1.6 mm)
Attaching cut-off discs, cut-off wheels,
grinding wheels, and emery wheels
2 High speed steel drill bit (Ø 1.6 mm) Drilling
2 Drywall cutting bit (Ø 3.2 mm) Cutting drywall
1 Wrench Removing attachments
1 Telescoping tool hanger
Hanging the rotary tool while using the fl ex
shaft
1 Flex shaft (915 mm)
Allowing fi ngertip control to cut, sand,
polish, etc.
1 Clamp-on base Attaching the tool hanger on the base
1 Locking key
Locking the spindle of fl ex shaft to replace
the accessory
To Next Page
Loading...
