Ryobi ELS52 User Manual (English)

Questions and Answers:

A
andersonlisaAug 1, 2025
What to do if Ryobi Log Splitter has oil leaks around cylinder ram?
- M
  Michael FritzAug 1, 2025
  If you notice oil leaks around the cylinder ram or from other points in your Ryobi Log Splitter, it could be due to several reasons. Firstly, air might be sealed in the hydraulic system during operation; in this case, loosen the bleed screw by 3-4 rotations before operating the log splitter. Secondly, ensure that the bleed screw is tightened before moving the log splitter. Thirdly, check if the oil drain bolt is not tight and tighten it. If the hydraulic control valve assembly and/or seals are worn, you will need to contact the dealer.
C
Caleb BoydAug 8, 2025
Why Ryobi ELS52 won’t split logs?
- D
  Dr. Richard Ruiz MDAug 8, 2025
  If your Ryobi Log Splitter won’t split logs, several factors could be the cause. First, ensure the log is positioned correctly, referring to the Operation section for proper loading. Second, the log's size or hardness might exceed the machine’s capacity; reduce the log size before attempting to split it. Third, a blunt wedge cutting edge can be the culprit; refer to the Maintenance section for instructions on sharpening the wedge. Fourth, if you observe oil leaks, locate the leak(s) and contact the dealer. Finally, unauthorized adjustments to the Maximum Pressure Limiting Screw, resulting in a lower maximum pressure rating, can prevent splitting; in this case, contact an authorized service center.
P
Preston NguyenAug 15, 2025
How to reset Ryobi ELS52 Log Splitter when motor fails to start?
- E
  Erika LeeAug 15, 2025
  If the motor on your Ryobi Log Splitter fails to start, it's possible that the Overload Protection Device is engaged to prevent damage. To resolve this, push the reset button (15).
A
Arthur SandovalAug 22, 2025
What to do if Ryobi Log Splitter log mover jerks and vibrates?
- X
  xcampbellAug 22, 2025
  If the log mover on your Ryobi Log Splitter jerks and vibrates, it may be due to a lack of hydraulic oil and excessive air in the hydraulic system. Check the oil level and refill if necessary. If the issue persists, contact the dealer.

Ryobi ELS52 Specifications

General

Brand	Ryobi
Model	ELS52
Category	Log Splitter
Language	English

Summary

General Safety Rules

Electrical Safety Precautions

Guidelines to prevent electrical shock, proper cord usage, and environmental hazards during operation.

Personal Protective Equipment

Emphasizes wearing appropriate attire, safety glasses, and hearing protection for user safety.

Safe Operating Environment

Focuses on maintaining a clean work area, keeping bystanders clear, and ensuring proper footing.

Specific Safety Rules

Operator and Bystander Safety

Ensures only qualified users operate the machine and keeps children and others at a safe distance.

Hydraulic System Precautions

Addresses risks associated with high fluid pressures, leaks, and proper system maintenance.

Log Handling and Operation

Details correct log placement, splitting techniques, and safe operation zone management.

Electrical and Control Safety

Covers circuit capacity, fuses, and the importance of understanding all controls for safe use.

Symbols Explained

Operational Symbols

Identifies symbols related to wet conditions, manual reading, eye protection, gloves, footwear, and hand safety.

Signal Word Meanings

Defines the risk levels associated with DANGER, WARNING, and CAUTION signal words.

Electrical Information

Extension Cord Guidelines

Provides recommendations for selecting, inspecting, and safely using extension cords.

Grounding Instructions

Details the importance and procedure for properly grounding the log splitter.

Electrical Connection Specifications

Outlines the required power supply voltage, frequency, and protection devices for the unit.

Assembly Procedure

Unpacking and Inspection

Instructions for removing the tool from the box, inspecting for damage, and handling packing materials.

Assembly Safety Warnings

Critical safety advice regarding missing parts, modifications, and power connection before assembly.

Assembly Steps

Assembling the Wheels

Step-by-step instructions for attaching the wheels to the log splitter base.

Operation

Pre-Operation Checks

Essential checks before starting, including bleed screw adjustment and oil level verification.

Starting the Log Splitter

Step-by-step guide for safely initiating the log splitter's operation using both hands.

Splitting Logs

Instructions for correctly positioning logs and operating the splitter for effective splitting.

Freeing a Jammed Log

Procedure for safely removing a log that has become stuck in the splitter.

Maintenance

General Maintenance Advice

Guidelines for cleaning the unit and warnings regarding contact with chemicals.

Lubrication Requirements

Information stating that bearings are pre-lubricated for the life of the unit.

Replacing Hydraulic Oil

Instructions and recommendations for changing the hydraulic oil at specified intervals.

Sharpening the Wedge

Guidance on how to maintain the cutting edge of the log splitter's wedge.

Troubleshooting

Motor Fails to Start

Identifies potential causes like overload protection and suggests solutions like pushing the reset button.

Log Splitting Issues

Addresses problems like improper log positioning, capacity limits, and blunt wedges.

Log Mover Jerks or Vibrates

Explains causes like low hydraulic oil or air in the system and suggests checking oil levels.

Hydraulic Oil Leaks

Covers potential causes such as air in the system, loose fittings, or worn valve components.

Limited Warranty

Warranty Coverage and Limitations

Details the 24-month warranty period, exclusions, and conditions for personal non-commercial use.

Warranty Exclusions

Lists items not covered, such as wear and tear, misuse, unauthorized repairs, and consumable parts.

Related product manuals