Ryobi EMS-1830SC User Manual

EMS-1830SC / EMS-1830SCL
F
GB
D
E
I
P
NL
S
DK
N
FIN
GR
HU
CZ
RU
RO
PL
®
SCIE À COUPE D'ONGLET RADIALE MANUEL D’UTILISATION 1
SLIDING COMPOUND MITRE SAW USER’S MANUAL 17
KAPP- UND GEHRUNGSSÄGE BEDIENUNGSANLEITUNG 30
SIERRA INGLETADORA RADIAL MANUAL DE UTILIZACIÓN 47
TRONCATRICE RADIALE MANUALE D’USO 63
SERRA CIRCULAR ANGULAR RADIAL MANUAL DE UTILIZAÇÃO 79
RADIALE VERSTEKZAAGMACHINE GEBRUIKERSHANDLEIDING 95
KAP- OCH GERINGSSÅG INSTRUKTIONSBOK 111
RADIALGERINGSSAV BRUGERVEJLEDNING 125
RADIAL GJÆRSAG BRUKSANVISNING 139
KULMAUSLIUKUSAHA KÄYTTÄJÄN KÄSIKIRJA 153
ΑΚΤΙΝΙΚΟ ΦΑΛΤΣΟΠΡΙΟΝΟ Ο∆ΗΓΙΕΣ ΧΡΗΣΗΣ 167
RADIÁL (LESZABÓ) GÉRVÁGÓ FŰRÉSZGÉP HASZNÁLATI ÚTMUTATÓ 185
POKOSOVÁ PILA S OTOČNÝM STOLEM NÁVOD K OBSLUZE 201
êÄÑàÄãúçÄü íéêñéÇéóçÄü èàãÄ
êìäéÇéÑëíÇé èé ùäëèãìÄíÄñàà 216
FERĂSTRĂU RADIAL DE TĂIAT ÎN UNGHI MANUAL DE UTILIZARE 230
PILARKA UKOŚNA PROMIENIOWA INSTRUKCJA OBSŁUGI 246
EMS-1830SC manual 14/05/04 12:26 Page A1

Ryobi EMS-1830SC Specifications

General

Brand	Ryobi
Model	EMS-1830SC
Category	Saw
Language	English

Summary

Safety Precautions

Additional Safety Precautions

When Saw Is Running

Reducing Electrocution Risk

Use Only Identical Replacement Parts

Use only identical replacement parts when servicing.

Avoid Wet Conditions

Do not use the saw in rain or where the floor is wet.

Double Insulated System

Specifications

Cutting Capacity

Description of Parts

Standard Accessories

Unpacking the Saw

Installing or Removing the Blade

Blade Installation and Removal (Fig. 1 & 2)

Instructions for installing and removing the saw blade.

Four Basic Saw Controls

Miter Lock Lever and Index Wheel

Adjusting the miter lock lever and index wheel for blade miter setting.

Bevel Lock Lever and Index Pin

Adjusting the bevel lock lever and index pin for blade bevel setting.

Alignment Procedures

Step One: Repositioning Zero Clearance Blade Insert (Fig. 9)

Repositioning the zero clearance blade insert for alignment.

Step Two: Slide Tube Adjustment (Fig. 10-11)

Adjusting the slide tubes for proper alignment and reducing play.

Step Three: Blade Square to Fence (Miter Alignment) (Fig. 12-13)

Aligning the blade square to the fence for miter adjustment.

Adjust Miter Scale Indicator (Fig. 14)

Adjusting the miter scale indicator to the 0° mark.

Alignment Procedures (Continued)

Step Four: Blade Square to Table (Bevel Adjustment) (Fig. 15)

Aligning the blade square to the table for bevel adjustment.

Adjust Bevel Scale Indicator (Fig. 16)

Adjusting the bevel scale indicator to the 0° mark.

Step Five: Positioning Zero Clearance Blade Insert

Positioning zero clearance blade insert for minimal tear out.

Miter Lock Lever Adjustment

Adjusting the miter lock lever for proper engagement.

Bevel Lock Lever Adjustment

Adjusting the bevel lock lever for proper engagement.

Bevel Pivot Movement/Adjustment (Fig. 5)

Adjusting the bevel pivot for smooth movement or to reduce looseness.

Mounting the Miter Saw (Fig. 18)

Portable Applications

Mounting instructions for portable applications using plywood.

Work Bench Applications

Mounting instructions for workbench applications.

Safety Instructions for Basic Saw Operations

Check Damaged Parts

Checking for proper alignment and condition of saw parts.

Reduce Risk from Jams, Slips, or Thrown Pieces

Protect Your Eyes, Hands, Face, and Ears

Preparing to Make the Cut

Basic Saw Operations

Making Common Slide Compound Cuts

Explains slide and chop cutting methods for the saw.

Basic Saw Operations (Continued)

Chop Cutting (Fig. 20)

Instructions for performing chop cuts on the saw.

Miter Cut (Fig. 21)

Performing miter cuts on the saw.

Bevel Cut (Fig. 22)

Performing bevel cuts on the saw.

Sliding Fence Adjustments

Adjusting or removing the sliding fence for cuts.

Vernier Bevel Scale Operation

Using the Vernier scale for precise bevel adjustments.

Compound Cut

Selecting desired bevel and miter positions for compound cuts.

Cutting Bowed Material (Fig. 23)

Safely cutting bowed material with the saw.

Workpiece Clamp Usage (Fig. 24)

Maintenance

Lower Blade Guard

Instructions for the lower blade guard's function and care.

Lubrication (Fig. 25)

Lubrication points for the saw's components.

Ball Bearings

Information on ball bearing lubrication for the unit.

Maintenance (Continued)

Infrequent Lubrication as Required

Specific points for infrequent lubrication of slide tubes and pivot shafts.

Motor Belt Tension (Fig. 26)

Checking and adjusting the motor belt tension.

Troubleshooting Guide

Troubleshooting Guide (Continued)

Warranty Statement

Declaration of Conformity