Ryobi EMS2026SCL User Manual

/7.%23/0%2!4)/.-!.5!,
7!44--3,)$).'#/-0/5.$
-)42%3!77)4(,!3%2
-/$%,%-33#,
4(!.+9/5&/2"59).'!29/")3,)$).'#/-0/5.$-)42%3!7
9OUR NEW MITRE SAW HAS BEEN ENGINEERED AND MANUFACTURED TO 2YOBIgS HIGH STANDARD FOR
DEPENDABILITYEASEOFOPERATIONANDOPERATORSAFETY0ROPERLYCAREDFORITWILLGIVEYOUYEARS
OFRUGGEDTROUBLEFREEPERFORMANCE
 #!54)/.#AREFULLYREADTHROUGHTHISENTIREOWNERgSMANUALBEFOREUSINGYOUR
3,)$).'#/-0/5.$-)42%3!7
0AYCLOSEATTENTIONTOTHE2ULESFOR3AFE/PERATION7ARNINGSAND#AUTIONS
)FYOUUSEYOURSAWPROPERLYANDONLYFORWHATITISINTENDEDYOUWILLENJOYYEARSOFSAFERELIABLE
SERVICE
4HANKYOUAGAINFORBUYING2YOBITOOLS
 3!6%4()3-!.5!,&/2&5452%2%&%2%.#%
N197

Ryobi EMS2026SCL Specifications

General

Blade diameter	254 mm
Blade bore	30 mm
No load speed	4500 rpm
Mitre capacity left	50°
Mitre capacity right	50°
Bevel capacity left	45°
Bevel capacity right	0°
Max Cutting Depth at 90°	90 mm
Power source	Corded Electric
Max. cutting capacity 90°/90°	90 mm x 305 mm
Max. cutting capacity 45°/45°	215 x 50 mm

Summary

Rules for Safe Operation

Safety Symbols and General Warnings

Explains safety symbols and provides general warnings for safe operation.

Personal Safety and Workspace

Covers personal attire, workspace cleanliness, user alertness, and avoiding hazards.

Tool Care and Operational Rules

Other Safety Precautions

Guards, Blades, and Work Area

Ensures proper use of guards, blades, fences, and maintains a safe work area.

Laser Safety

Provides specific guidelines for safe laser beam usage and alignment.

Assembly Procedures

Vice and Material Support Installation

Details attaching the vice and installing material supports for stability.

Dust Bag and Locking Mechanisms

Mitre Adjustment and Fence Setup

Blade Guard and Electrical Connection

Adjustments and Alignment

Blade Replacement and Safety

Guide to replacing the blade, including safety warnings and correct installation.

Blade-to-Fence Alignment

Procedure for ensuring the saw blade is square to the fence.

Blade-to-Mitre Table Alignment

Procedure for ensuring the saw blade is square to the mitre table.

Further Adjustments and Operation

45 Degree Alignment and Depth Control

Adjusting blade to mitre table at 45° and setting the depth of cut.

Mitre Lock Adjustment

Cutting Techniques

To Crosscut with Mitre Saw

To Bevel Cut with Mitre Saw

Advanced Cutting and Material Handling

Compound Mitre Cut

Compound Cut with Mitre Saw

Workpiece Handling and Molding Cuts

Cutting Larger Workpieces with Slide Action

Laying Molding Flat on Mitre Table