11
GETTING STARTED
8
3 4
Loosen and remove the oil cap. Add bar and chain lubricant
in the bar lube reservoir for automatic bar and chain
lubrication. Place the cap and tighten securely.
NOTE: Use chain and bar oil only. Other oils will not stick
to the chain properly and will result in damage to the chain
and bar.
Remove the scabbard from the chain bar.
Place the oil cap, and tighten securely.
5
Attach the shoulder strap hanger.
Align the button with the guide recess on the power head
shaft coupler and slide the two shafts together. Rotate
the pruner attachment shaft until the button locks into the
positioning hole. Tighten the knob securely.
To Next Page
Loading...
Need help?
General
