To Next PageTo Next PageWhat to do if Ryobi EXPAND-IT RYPRN33 Pole Saw chain is not rotating?
If the Ryobi Pole Saw chain isn't rotating, it might be because the chain tension is too tight. To resolve this, retension the chain. Also, inspect the guide bar and chain for any signs of damage.
Why is my Ryobi EXPAND-IT RYPRN33 Pole Saw bar and chain running hot and smoking?
If the bar and chain on your Ryobi Pole Saw are running hot and smoking, there could be a couple of reasons. First, check the chain tension and adjust as needed. Also, inspect the chain oil tank to ensure it's not empty. If the chain oil tank is empty, check the chain tension for an overtight condition.
General| Power Source | Gas |
|---|---|
| Engine Displacement | 30 cc |
| Cutting Bar Length | 10 in. |
| Chain Pitch | 3/8 in. |
| Reach | 12 ft. |
| Chain Gauge | 0.050 in. |
| Extension Pole Length | 3 feet |
Provides essential safety guidelines and precautions for operating the pruner attachment and related power equipment.
Specific safety precautions for users operating the pruner attachment with an electric power head.
Details kickback hazards, safe cutting practices, and precautions to prevent injury during operation.
Highlights safety measures to avoid electrocution from overhead lines and injury from falling branches.
Provides guidelines for safe handling, proper storage, and ensuring the unit is off before maintenance.
Defines the signal words used in the manual to communicate risk levels associated with product use.
Illustrates and explains common symbols found on the product for user understanding and safe operation.
Overview of the pruner attachment, emphasizing the need to understand the product and safety rules before use.
Details technical specifications of the pruner attachment, including bar length, chain pitch, and drive links.
Instructions for carefully removing items from the box, checking the packing list, and inspecting for damage.
Guides on how to properly connect the pruner attachment to the power head or extension shaft.
Step-by-step instructions for installing the shoulder strap hanger and attaching the shoulder strap.
Lists the intended uses of the pruner attachment, primarily limbing and pruning small branches.
Details essential preparation steps before cutting, including grip, stance, and safety precautions.
Outlines the correct steps for making cuts to prevent damage to bark and ensure efficient cutting.
Provides detailed techniques and precautions for limbing and pruning, including angles and branch handling.
Instructions on positioning the pruner attachment safely on the ground before starting the engine or motor.
Covers general cleaning practices, advice on using cleaning agents, and precautions for plastic parts.
Detailed steps for safely removing and replacing the guide bar and saw chain, including tensioning.
Guidance on adjusting the idle speed of the power head engine to prevent the chain from turning at idle.
Explains how to properly tension the saw chain, including checks for cold and warm chain conditions.
Instructions on filling the chain oiler tank with the correct lubricant and checking its level.
Discusses chain maintenance, including factors affecting cutting performance and kickback risk.
Provides a step-by-step guide on how to sharpen the chain cutters using the correct file and technique.
Details two methods for attaching a hanger to the attachment shaft for convenient storage.
Guidelines for cleaning, lubricating, and storing the pruner attachment safely and properly.
Addresses problems like hot or smoking bar and chain, and solutions involving chain tension and oil.
Troubleshoots issues where the engine runs but the chain is not rotating, focusing on tension and damage.
